PCI-6886

This product is End-of-Life. Please contect our Sales Department for the recommended replacement.

The PCI-6886 is centered on a powerful Intel Celeron® M processor that supports enhanced Intel “SpeedStep” technology and uses Intel’s 852GM chipset. This chipset is ideal for embedded computing and provide an optimized on-board integrated graphics solution. “SpeedStep” technology intelligently focuses system power where the CPU needs it and automatically regulates power usage to minimize power consumption.

Features

  • Embedded Fanless Intel Celeron M 600 MHz Processor
  • Supports 400 MHz Front Side Bus
  • Supports 200 MHz & 266MHz DDR SDRAM
  • Supports of to 1000Base-T Ethernet on board
  • Supports up to 2 Channel 36 bits LVDS for LCD
  • Provides both Analog VGA and DVI
  • Supports 4 x USB 2.0 ports

Overview

The PCI-6886 is centered on a powerful Intel Celeron® M processor that supports enhanced Intel “SpeedStep” technology and uses Intel’s 852GM chipset. This chipset is ideal for embedded computing and provide an optimized on-board integrated graphics solution. “SpeedStep” technology intelligently focuses system power where the CPU needs it and automatically regulates power usage to minimize power consumption.

The PCI-6886's design is based on the small Half-Size PCI Card form factor and provides support for PCI Card expansion through the use of a passive PCI backplane. EMAC can provide backplanes and enclosures for the PCI-6886.

On-board features include: four serial ports, one multi-mode parallel (ECP/EPP/SPP) port, four USB (Universal Serial Bus) 1.1/2.0 ports, an Ethernet port, and a PS/2 keyboard/mouse interface. The built-in high-speed PCI IDE controller supports both PIO and UDMA/100 bus master modes. Up to four IDE devices can be connected, including large hard disks, CD-ROM drives, and tape backup drives.

Specifications

Processor
CPU
Embedded Fanless Intel Celeron M
Clock Speed
600 MHz
Processor Misc.

Chipset: Intel 852GM/GMCH + 6300ESB
Memory
RAM
2x 200-pin DDR SODIMM
Primary Flash
1x CompactFlash™ card Type I/II
BIOS/ Bootloader
AWARD 4Mbit Flash BIOS
Primary IO
GPIO
8x GPIO
Disk Interface
1x FDD, 2x EIDE support for 4 Devices
Audio
AC97 (line-in/Line-out/Mic-in)
Ethernet
IEEE 802.3U/ 802.3z/ab 100/1000 Base-T RJ-45 82551ER
Serial Ports
3x RS-232, 1x RS-232/422/485
Secondary IO
PS/2
Yes
Display
Chipset
Intel 852GM chip integrated. (Extreme Graphics 2)
LVDS Interface
2 Channel LVDS (36-bit)
Multi-Display
Dual Independent CRT/DVI + LVDS
Expansion
Bus Expansion
1x PCI
Misc
Operating Systems
EMAC OE Linux, MicroPython, FreeRTOS
Operating Systems Compatibility
  •  RTAI Real-Time Linux
  • Wind River VxWorks
  • QNX Neutrino RTOS

Mechanical and Environmental

Dimensions
Size
7.3" ×4.8" (185mm × 121mm)
Weight
0.27 kg
Power Requirements
Voltage
5 V
Typical Voltage
5 V
Typical Current
1.9 A
Max Boot Current
2.5 A
Power Misc.
  • Power Management: APM 1.2, ACPI support

Pricing

Pricing correct as of January 2021. Please contact EMAC for Current Pricing and Lead Time. Due to volatility in the electronics industry pricing is subject to change.

OEM / Quantity Pricing Available on Request - Less Services

(Single Unit Pricing. Includes: Integration, Setup,Testing, & Enhanced Support)

Product # Description Price
PCI-6886F-M Celeron M 600 MHZ PCI Slot CARD 100 Base-T Call
PCI-6886FG-M Celeron M 600 MHZ PCI Card W/ 1000 Base-T Call

Additional Options