The SoM-536EM is Based on the Analog Devices Blackfin ADSP-BF536 processor. This embedded processor has an Ethernet MAC built-in along with 3 serial ports. The BF536 combines a 32-bit RISC-like instruction set and dual 16-bit multiply accumulate (MAC) signal processing functionality with the ease-of-use attributes found in general-purpose microcontrollers. This combination of processing attributes enables Blackfin Processors to perform equally well in both signal processing and control processing applications.
Features
- Small, 144 pin SODIMM form factor (2.66" x 1.5")
- Blackfin hybrid RISC/DSP high performance core running at up 600 MHz
- Low Power Consumption with Dynamic Power Management.
- 10/100BaseT Ethernet with on-board PHY
- 2 serial ports with handshake
- 1 CAN 2.0B port
- 1-Wire® Network provision
- Up to 64 MB of SDRAM
- Up to 4 MB of Flash
- 128K Bytes of Serial Flash
- Battery backed Real Time Clock
- SPI, I2S & I2C
- Timer/Counters and Pulse Width Modulation (PWMs) port
- Typical power requirement less than 1 Watt
- JTAG for debug, including real-time trace
- FREE Eclipse IDE with GCC & GDB development tools
Overview
The SoM-536EM is Based on the Analog Devices Blackfin ADSP-BF536 processor. This embedded processor has an Ethernet MAC built-in along with 3 serial ports. The BF536 combines a 32-bit RISC-like instruction set and dual 16-bit multiply accumulate (MAC) signal processing functionality with the ease-of-use attributes found in general-purpose microcontrollers. This combination of processing attributes enables Blackfin Processors to perform equally well in both signal processing and control processing applications. It is equipped with an MMU and can utilize uClinux Operating System with Real Time extensions.
A SoM (System on Module) is a small embedded module that contains the core of a microprocessor system. Using the same small SoM SODIMM form-factor utilized by other EMAC SoM modules, the SoM-536EM is the ideal processor engine for your next design. All of the Blackfin’s processor core is included on this tiny board including: Flash, Memory, Serial Ports, Ethernet, CAN, PWMs, Timer/Counters, A/D, digital I/O lines, Clock/Calendar, and more.
The SoM-536EM is designed to plug into a carrier board that contains all the connectors and any custom I/O required for the application. This approach allows the customer or EMAC to design a Custom Carrier Board, that meets the customer's I/O, dimensional, and connector requirements without having to worry about the processor, memory, and standard I/O functionality. With this System on Module approach, a semi-custom hardware platform can be developed in as little as a month.
In addition to the option of the developing a Carrier board, one can be purchased off-the-shelf from EMAC. EMAC provides off-the-shelf Carrier boards that feature A/D, D/A, MMC/SD card, keypad, LCD, and Modem interfaces. The off-the-shelf Carrier Board (SoM-100ES) allows the user to immediately start coding their application using the powerful uClinux Operating System and Tools.
The System On Module approach provides the flexibility of a fully customized product at a greatly reduced cost.
Manuals | |
---|---|
SoM-536EM_User_Manual.pdf | Download (PDF) |
Data Sheets |
---|
Specifications
Processor | |
---|---|
CPU | Embedded Blackfin BF536 processor |
Clock Speed | 400 MHz |
Memory | |
---|---|
Primary Flash | 2 MB External Flash (4 MB Optional) |
Secondary Flash | 512Kb of Internal Flash |
BIOS/ Bootloader | Resident Flash Bootloader (Das Uboot) |
Memory Misc. |
|
Primary IO | |
---|---|
GPIO | 24 General Purpose I/Os with 25 ma. drive when used as an output |
Serial Ports | 2 serial TTL level serial ports with a max. baud rate of 115K baud (each UART requires external RS level shifting) |
Secondary IO | |
---|---|
CAN | Full CAN 2.0B |
SPI | High-Speed SPI port with DMA |
Timers/ Counters/ PWM | 8x 32-bit timers/counters with capture, compare, and DMA capability |
I2C | Bus Controller |
Secondary I/O Misc. | I2S: Dual Channel High-Speed SPORTS supporting up to 8 I2S channels |
Expansion | |
---|---|
Bus Expansion | Local Blackfin BF536 Bus accessible through SODIMM provides 22 address lines, 16 data bus lines, and control lines |
Bus Misc. | 1-Wire®: 1-Wire® Bus Master capability |
Misc | |
---|---|
Operating Systems Compatibility | Operating System: uClinux with Optional RTAI extensions |
SOM Type | Microcontroller SODIMM Modules |
Mechanical and Environmental
Dimensions | |
---|---|
Size | 2.66" ×1.5" (67mm × 38mm) |
Power Requirements | |
---|---|
Voltage | 3.3 V |
Typical Voltage | 3.3 V |
Typical Current | 300 mA |
Environmental | |
---|---|
Low Operating Temperature | 0 C (32 F) |
High Operating Temperature | 70 C (158 F) |
Upper Operating Humidity | 90% |
Pricing
Pricing correct as of January 2021. Please contact EMAC for Current Pricing and Lead Time. Due to volatility in the electronics industry pricing is subject to change.
OEM / Quantity Pricing Available on Request - Less Services
(Single Unit Pricing. Includes: Integration, Setup,Testing, & Enhanced Support)
Product # | Description | Price |
---|
Non-stock Minimum Order: 50, NCNR
Carrier Board Options
Peripheral Options
Product # | Description | Price |
---|---|---|
Operating Systems | ||
SL010-B024-000D | Xenomai Real-Time Extensions (one-time charge) | $150.00 |