EMAC has created the iPac-9302, an inexpensive, feature packed embedded Single Board Computer (SBC) based on the Cirrus EP9302 processor. This ARM9 based board has features, similar to our other Microcontrollers, A/D, PWM, Digital I/O, Serial, USB, and Ethernet. The iPac-9302 is a web enabled microcontroller device offering the ability to run an embedded server to display it’s current monitored or logged data. This web connection can be via standard wired 802.3u 10/100 BaseT Fast Ethernet or 802.11 wireless wifi networking with the proper linux modules and adapters. This Microcontroller has all connectors brought out as headers on a board that is same footprint of a standard PC/104 module at 3.77" x 3.54". While slightly larger than our SoM Microcontroller offerings, this Industrial Strength SBC is perfectly suited for just about any Embedded Data Acquisition and Control application. This iPAC-9302 has a Minimum Order Quantity (MOQ - 25 pieces)
EMAC has created the iPac-9302, an inexpensive, feature packed embedded Single Board Computer (SBC) based on the Cirrus EP9302 processor. This ARM9 based board has features, similar to our other Microcontrollers, A/D, PWM, Digital I/O, Serial, USB, and Ethernet. The iPac-9302 is a web enabled microcontroller device offering the ability to run an embedded server to display it’s current monitored or logged data. This web connection can be via standard wired 802.3u 10/100 BaseT Fast Ethernet or 802.11 wireless wifi networking with the proper linux modules and adapters. This Microcontroller has all connectors brought out as headers on a board that is same footprint of a standard PC/104 module at 3.77" x 3.54". While slightly larger than our SoM Microcontroller offerings, this Industrial Strength SBC is perfectly suited for just about any Embedded Data Acquisition and Control application.
Also available is an optional Screw Terminal board(PCD-39E00-000) for the iPac (shown to the right) that is stackable, providing numerous I/O points with screw termination, in a very small package. Two Screw Terminal boards are required to accommodate all of the iPac I/O.
The resident flash on the iPac can be programmed via it's serial bootloader firmware over the RS232 com port or via it's JTAG port. Software can be written with Microsoft's .NET Micro Framework, Windows CE 6.0 or Linux (Open Embedded).
On the Linux side EMAC provides a Free Eclipse IDE that is pre-integrated to provide everything the user needs for developing iPac 9302 applications. All the compiling, converting debugging, and downloading inherent to iPac 9302 development can be done from one easy to use high level interface. The distribution provides an SDK for the EMAC iPac 9302 which contains source examples for the Ethernet, USB, Digital I/O ports, A/D, PWM, SPI, SD/MMC.
The EMAC Eclipse IDE is a powerful, yet flexible Integrated Development Environment for the iPac 9302 and even features SVN version control support. For more information of EMAC's Eclipse based Development Environment click here.
The iPac 9302 can use most of the EMAC's standard Linux Modules including the Modbus module. For a listing of these module see our Embedded Linux Operating Systems Page.
Just Write It and Run It!
Manuals | |
---|---|
iPac_9302_Manual.pdf | Download (PDF) |
iPac_9302_Manual-11.pdf | Download (PDF) |
Enhanced_Bootloader.pdf | Download (PDF) |
EP9302_data_sheet.pdf | Download (PDF) |
EP9301_User_Guide.pdf | Download (PDF) |
Dimensional_iPAC-9302_R2.01.00_12-1-08_pcb.pdf | Download (PDF) |
Data Sheets |
---|
Processor | |
---|---|
CPU | Cirrus Logic EP9302 ARM9 |
Clock Speed | 200 MHz |
Memory | |
---|---|
RAM | 16 MB |
Primary Flash | 16 MB external |
Memory Misc. | 256K Bytes of EEPROM |
Primary IO | |
---|---|
GPIO | 16x prog. 3.3V I/O lines, 16x PLD 3.3V in, 8x PLD 3.3V out, 8x PLD HDOC out |
SDIO | 9x Synchronous Serial |
Ethernet | 10/100 BaseT Ethernet |
USB | 2x USB 2.0 |
Serial Ports | 1x RS232, 1x RS-232/422/485 |
Primary I/O Misc. |
|
Secondary IO | |
---|---|
Timers/ Counters/ PWM | 3x multi-purpose |
Analog | |
---|---|
A/D Channels | 5 Chan. 12 bit |
D/A Channels | none |
Misc | |
---|---|
Operating Systems | EMAC OE Linux |
Dimensions | |
---|---|
Size | 3.8" ×3.5" (96mm × 88mm) |
Power Requirements | |
---|---|
Voltage | 5 V |
Typical Current | 450 mA |
Environmental | |
---|---|
Low Operating Temperature | 0 C (32 F) |
High Operating Temperature | 70 C (158 F) |
Upper Operating Humidity | 90% |
Pricing correct as of January 2021. Please contact EMAC for Current Pricing and Lead Time. Due to volatility in the electronics industry pricing is subject to change.
OEM / Quantity Pricing Available on Request - Less Services
(Single Unit Pricing. Includes: Integration, Setup,Testing, & Enhanced Support)
Product # | Description | Price |
---|---|---|
i302-01-01013 | IPAC 9302 IPAC 9302 W/ 16MB FLASH & RAM | Call |
i302-01-02013 | IPAC 9302 IPAC 9302 W/ 32MB FLASH & RAM | Call |
i302-01-03013 | IPAC 9302 IPAC 9302 W/ 64MB FLASH & RAM | $225.00 |
Product # | Description | Price |
---|---|---|
Power Supplies | ||
PER-PWR-00032 | 5V @ 2.5A PS (110V @ 60 Hz US) | $20.00 |
PER-PWR-00033 | 5V @ 3.2A PS (100-220V @ 47-63 Hz Intl.) | $28.00 |
Terminal Boards | ||
PCD-39E00-000 | Screw Terminal Board Kit containing 40 pin and 50 pin connection cables ***See Product GPIO*** | $50.00 |
Cables & Adapters | ||
CAB-35-003-1 | 6" DB9 TO DB9 NULL MODEM EXTENSION CABLE | $10.00 |
CAB-35-004-1 | 6" 10 PIN HEADER TO DB9 SERIAL ADAPTER CABLE | $5.00 |
PER-ADP-00020 | JTAG ADAPTER BOARD | $10.00 |
Operating Systems | ||
SL013-AON-X0050 | Embedded Linux Standard ARM Build | Free |
SC600-000-0010D | Windows CE 6.0 Pro License (Basic configured installation included with License, Flash and SBC purchase; SOLD ONLY WITH HARD DRIVE OR FLASH DRIVE MEDIA) | $25.00 |