Related Products
PCM-9365 is 3.5" form factor (146 x 102 mm) and powered by the latest generation of Intel® Celeron® N2930 and Atom™ E3825 processors which have low power features but also good performance computing, especially for multimedia capabilities compared to earlier generations. Meanwhile, PCM-9365 offers flexible expansion possibilities: two full-size mini PCIe, PCI-104, and the 2nd LVDS by request. PCM-9365 supports various display interfaces including HDMI, VGA, and 48-bit LVDS, and rich I/O: 2 x GbE, SATA, mSATA, 4xSerial Ports, USB 3.0 and 5 x USB 2.0.
The VDX-6324 utilizes an onboard Vortex86DX Fanless 800MHz processor built for Ultra Low Power Consumption. The processor is highly integrated so that it reduces the price of any board utilizing this processor. The VDX-6324 comes with a PC/104 bus connector and an optional PCI-104 / PC/104+ bus connector which allows it to utilize higher end PCI bus based modules. **Flash Disk not included.**
µPac HC16
- CMOS 68HC16Z1 with 16.78 MHz clock speed
- Up to 1 MB of Battery Backed RAM and up to 1 MB EPROM/Flash. 64K of RAM included, standard. Also provided are 512 bytes of SEEPROM.
- Fast 8 channel, 10 bit analog to digital converter with an 9 microsecond conversion rate.
- The optional D/A has 8 channels with 8 bit resolution.
Receive consultation or quotes about this product from our sales staff.
Request a quoteThe MicroPac series of single board computers feature micro size with micro power consumption at a micro price. The MicroPac HC16 has dimensions of 5.35" by 3.66" with a power requirement of 200 mA. typical. The MicroPac HC16 is ideally suited for controller applications requiring an on-board Liquid Crystal Display (LCD) and/or keypad interface circuitry.
Features
- CPU: CMOS 68HC16Z1 with 16.78 MHz clock speed
- MEMORY: Up to 1 MB of Battery Backed RAM and up to 1 MB EPROM/Flash. 64K of RAM included, standard. Also provided are 512 bytes of SEEPROM.
- DIGITAL I/O: 16 TTL level, programmable I/O lines, and 8 additional high drive (500 ma. sink, not to exceed package dissipation of 2.25 Watts) outputs. The 24 I/O lines terminate to a standard 50 pin I/O rack header connector.
- ANALOG INPUTS: Fast 8 channel, 10 bit analog to digital converter with an 9 microsecond conversion rate.
- ANALOG OUTPUTS: The optional D/A has 8 channels with 8 bit resolution.
- COUNTER/TIMER/PWM: 2, 16 bit prescaled counters featuring 4, 16 bit output compare registers, 3, 16 bit input capture registers, a bi-directional input/output register, and 2 PWM outputs. An 8 bit counter/timer, a Watchdog timer, and a Real Time Clock/Calendar is also provided.
- COMMUNICATION: Up to 2 RS-232 serial ports, one of which is standard. Conversion of the standard serial port from RS-232 to RS-422/485 is optionally available.
- INTERFACES: A Backlit LCD interface is provided standard with an optional 20 key, keypad interface available. Also included is a 50 pin bus expansion header and a standard 10 pin BDM interface connector.
Overview
The MicroPac series of single board computers feature micro size with micro power consumption at a micro price. The MicroPac HC16 has dimensions of 5.35" by 3.66" with a power requirement of 200 mA. typical. The MicroPac HC16 is ideally suited for controller applications requiring an on-board Liquid Crystal Display (LCD) and/or keypad interface circuitry.
The MicroPac HC16 single board computer utilizes the Freescale 68HC16Z1 16 bit microprocessor which is code compatible with 68HC11 controllers. This high integration processor features integer DSP capability, programmable I/O ports, interrupt controller, watchdog timer, A/D converter, pulse width modulation (PWM) capability, and timer/counters.
EMAC integrated this powerful processor onto a board that contains 24 digital I/O lines, 2 serial RS-232/485 ports, Battery Backed Real Time Clock/Calendar, LCD interface, Keypad interface, 8 channels of A/D and 8 channels of D/A. This is a do-it-all single board computer.
The MicroPac 68HC16 comes equipped with a Background Debug Mode (BDM) port. Through this port programs can be downloaded and debugged. The BDM when used with the battery backed RAM and development software provides a full featured development system with features comparable to those of an In Circuit Emulator.
DSP capability, fast Analog conversions, and low interrupt latency time make this board ideal for demanding real time applications.
| Manuals | |
|---|---|
| MHC16 hrd r03.MAN.pdf | Download (PDF) |
| Data Sheets |
|---|
Specifications
| Processor | |
|---|---|
| CPU | CMOS 68HC16Z1 |
| Clock Speed | 16.78 MHz |
| Memory | |
|---|---|
| RAM | 1MB Battery Backed RAM |
| Primary Flash | 512K of EPROM |
| Primary IO | |
|---|---|
| GPIO | 8x prog. I/O 4x in/4x out |
| Disk Interface | A Backlit LCD interface is provided standard with an optional 20 key, keypad interface available. Also included is a 50 pin bus expansion header and a standard 10 pin BDM interface connector. |
| Serial Ports | 1x RS-232 |
| Secondary IO | |
|---|---|
| Timers/ Counters/ PWM | 16 channels of PWN |
| Keypad | Yes
|
| Analog | |
|---|---|
| A/D Channels | 8 Chan. 10 bit |
| D/A Channels | 8 Chan. 8 bit |
Mechanical and Environmental
| Dimensions | |
|---|---|
| Size | 5.35" ×3.66" (135mm × 92mm) |
| Power Requirements | |
|---|---|
| Voltage | 5 V |
| Typical Current | 200 mA |
| Max Boot Current | 250 mA |
| Environmental | |
|---|---|
| Low Operating Temperature | 0 C (32 F) |
| High Operating Temperature | 70 C (158 F) |
| Upper Operating Humidity | 90% |
Pricing
OEM / Quantity Pricing Available on Request - Less Services
(Single Unit Pricing. Includes: Integration, Setup,Testing, & Enhanced Support)
| Product # | Description | Price |
|---|---|---|
| E401-01 | MICROPAC HC16 COMPUTER, DISK AND MANUAL (Minimum Order Quantity 50) | $250.00 |
Peripheral Options
| Product # | Description | Price |
|---|---|---|
| Peripherals | ||
| E401-04 | 4 CHANNEL, 8-BIT RESOLUTION D/A CONVERTER | $79.00 |
| E401-05 | RS-422/485 FULL DUPLEX COM PORT (REQUIRED FOR NETWORK) | $19.00 |
| E010-18 | 128 K (64 K X 16) FLASH UPGRADE | $20.00 |
| E010-19 | 256 K (128 K X 16) FLASH UPGRADE | Call |
| E010-20 | 512 K (256 K X 16) FLASH UPGRADE | Call |
| E010-11 | WALL TRANSFORMER 110V - 9 V 500 MA | $10.00 |
| E010-15 | WALL TRANSFORMER 110V - 9 V 1 A | $18.00 |
| E010-10 | WALL TRANSFORMER 110V - 12 V 800 MA | $10.00 |
| Keypads | ||
| E401-03 | 1 SERIAL RS-232 PORT, K-PAD INTERFACE, 16 BIT COUNTER | Call |
| E020-25 | 12 KEY MEM TELEPHONE STYLE KEYPAD | $25.00 |
| E020-21 | 16 KEY MEMBRANE HEX STYLE KEYPAD | $30.00 |
| Displays | ||
| E020-30 | 20 CHAR. X 2 Line LCD Display | $49.00 |
| E020-31 | 20 CHAR. X 2 Line LCD backlit display | $65.00 |
| E020-32 | 20 char. X 4 line LCD | $74.00 |
| E020-33 | 20 Char. X 4 line backlit LCD (EOL, LIMITED AVAILABILITY) | Call |
| Cables & Adapters | ||
| E400-00 | BACKDOOR DEBUG CABLE (CONNECTS TO PC PRINTER PORT) | $109.00 |
| Memory | ||
| E401-09 | 256 K (2, 128 K BY 8) RAM UPGRADE (FACTORY INSTALLED) | $36.00 |
| E401-14 | 1 MB (2, 512 K BY 8) RAM UPGRADE (FACTORY INSTALLED) | $64.00 |